Resetting damaged trash disposal is one of the simplest remedies. We will take you through different troubleshootings and will discuss additional issues related to garbage disposal jam.

garbage disposal jam.

How To Fix Garbage Disposal Jam? All You Know Now

You can now find trash disposal in practically every residential sink. This rather simple equipment has served its duty admirably for many years. But that doesn't mean it won't break down or stop working at some point. Fortunately, restoring garbage disposal normal operation is usually simple.

Use The Reset Button To Restart

To avoid electrocution, switch off the disposal before performing any repairs. When your trash disposal becomes jammed, a reset button beneath it trips. It's a precautionary measure, similar to how a circuit breaker trips when too much current flows through it. We recommend waiting 15 minutes before resetting to avoid any further damage.

It's usually red and can be found at the bottom of the disposal. You should hear a click sound when you hit the reset button. If It's been reset, turn on the water, and the disposal should function. This is frequently sufficient to correct the condition. If the impediment is too large, it will most likely trip again. If this is the case, switch the power off for a few minutes of your garbage disposal before attempting to reset it again.

 Reset Button To Restart

Prepare the Wrenchette - Garbage Disposal Unjamming Wrench

If the disposal still doesn't work after resetting it, look for the wrenchette (the small, unique wrench with your trash disposal). If you throw it out with the packaging, a 1/4-inch Allen wrench (also called a Hex wrench) will suffice.


Insert the Allen wrench or a wrenchette into the bottom hex hole the of the garbage disposal and turn the wrench back and forth. Continue to crank the wrench in both directions until you can easily turn it.

Before you may use the wrench again, you must remove it from the disposal. Hopefully, after performing the steps mentioned earlier, your trash disposal will be operational. If the garbage disposal is still not working In this instance, you should most likely contact a licensed plumber in your region.

Buzzing And Humming Sounds

Power is getting to the unit if your garbage disposal is humming (or buzzing), but the blades aren't spinning. If the motor is buzzing but not grinding, it may be clogged or stuck. Even if you turn off the garbage disposal, it occasionally stops working.


  • Small food particles are a common source of this issue. If the food particles become stuck between the impeller blade and the drain aperture, it may jam. Here's what you should do to resolve the problem:
  • Simply unplugging the device and disconnecting the electrical circuit will prevent the trash disposal motor from overheating and protect you from electric shock.
  • Insert the hex wrencehete or an Allen wrench into the hex hole at the waste disposal unit's base.
  • Begin moving the wrench back and forth to release the stuck particle in the impeller blades.
  • If the disposer lacks a hex hole or you don't have an Allen wrench, get a short broom and jam from above into it. Press it against the impeller blade and start turning the broom by hand.
  • Reconnect the electricity and check if the garbage disposal is working properly. Keep track of whether or not the garbage disposal is humming or buzzing, or if you can detect any other sounds from the device.

If this does not resolve the problem, there may be something wrong with your waste disposal. Contact an expert plumbing services in your area to repair your plumbing.

Slow Drainage

There are several possible causes for trash disposal to empty more slowly than usual, but the most common is a blockage, just as with a standard sink drain. The disassembly of the drain trap and discharge line is required to remove the trapped food.

It may be as simple as removing the drain pipe's bolts to disassemble the disposal.

How To?

  • You must disconnect the garbage disposal  before removing the drain trap and the drain line that leads to the exterior.
  • Remove any debris that has accumulated and thoroughly clean the disposal.

If It Didn't Work

If none is the issue, the obstruction is most likely in the drain line that runs from the main drain into the wall. You can use a spiral drain opener to clear the clog in the sink.

Drain the water and reconnect the outflow hose from the drain trap to the disposal's side.

To ensure an unfettered water flow, turn on the sink's water supply and the trash disposal.

You Must Remove The Clutter!

Is your garbage disposal still clogged? Don't be concerned; follow the above steps. Even if the disposal is turned off, never put your hands down; use tongs to recover any heavy items that may have fallen in.

Turn on the water and power after removing all the major trash and food. Everything should be back up and running immediately.

For items too large to fit at your disposal, always use a garbage can rather than your disposal. You will not have to go through this process again.

Wrap Up

It's probably clogged if your disposal is extremely loud, doesn't grind when you turn it on or stops working before you turn it off. Keep the disposal running if it's clogged to avoid motor failure. Trash disposals, in general, are rock-solid equipment that never lets you down or complain.

You can, however, expect a complaint from your garbage disposal if you ever clog it. It'll probably start producing too much noise, leaking, or simply refusing to obey your directions. Keep these trash disposal repair tips on hand. Maybe you'll need them one day.

Share this post