The trash disposal will sometimes get contaminated with water from the sink drain. If you continue reading, we'll teach you how to block the dishwasher's drain linked to your disposal unit.

The first step in a normal process is to unplug the trash disposal. The water should not leak from the waste disposal and the pipes.

Put A Stopper In the Disposal

  1. Since the knockout stopper is a regular part of the waste disposal and can't be put back in once it's been taken out, the drain hole will need to be covered. Most hardware stores won't have rubber covers made specifically for this purpose,
  2. but you should be able to find something that will work. The rubber cover of a 7/8-inch-diameter will do the job easily.
Put A Stopper In the Disposal
  1. Using this method, a rubber cover will stay in place. A plumbers clamp, which you can get at any hardware store, might also work. Leaks are stopped when the Cap is firmly tapped on the hole. The Cap is easy to take off, but the clamp can help keep it in place even when much pressure is on it.
  2. Now, insert one of the rubber plugs into the opening that leads to the drain. Applying pressure with your thumb ensures it is firmly inserted inside the drain opening. If you're concerned that it won't fit well, give it a few light taps with the hammer. When you are ready to reinstall the dishwasher, be careful not to use so much pressure that the rack won't come out on its own.

Note: Modern dishwashers all come with an input valve for waste disposal. That is how the water from the sink gets to the sewer system in the city.

If your trash disposal and dishwasher are connected, you'd have to take a plug out of the drain before running the dishwasher. The drain leaks could ruin the things in the cabinet and the subfloor below.

When the drain line is disconnected, water will leak from the open end. If the input is blocked, the water will not leak. You can force water through a clogged drain and into the sink with a plunger.

Garbage Disposal Dishwasher Plug - Garbage Fix
A dishwasher drain with trash disposal can easily become clogged. However, there isn’t a lot of information available online about this. Don’t be concerned. We’ll go over everything you need to know right here.

Alternative Method - Copper Fitting

If you're seeking a different technique to plug this drain, consider the methods listed below. Take the following actions immediately after removing the dishwasher:

Clear The Space

Making space behind the sink will facilitate access to the trash disposal. Place a bucket under the drain pipe from the dishwasher to the disposal to protect the sink. Disconnect the drain pipe from the dishwasher first.

Separate The Fitting

After removing the clamp, separate the barbed fitting from the hose by pulling it away.

To empty it, just put the hose inside the bucket. The best way is to release the clamps at the dishwasher drain connection ends.

Separate The Fitting

Use Cap Of Copper Pipe

Now use the Cap of the copper pipe and insert it into the open end of the drain. Clamp the pipe end cap in the connection after inserting it.

Using a barbed fitting waste disposal drain line, attach the dishwasher by inserting the open side of the connection. Put some strain on the clamp to keep it in place. Drain water down to look for leaks.

Use Cap Of Copper Pipe

Importance Of Knockout Plug

These plugs are often used to connect garbage disposals and dishwashers. It is essential to employ removable plugs, known as knockouts, to cover up any holes that are unneeded or unused.

Typically, the metal used to construct these plugs matches that of the tube or hole it plugs. If the new dishwasher you bought doesn't drain correctly, you may want to consider replacing this plug. You should, however, only attempt to do so if you intend to connect the waste disposal to the dishwasher.

Removing The Knockout Plug

A dishwasher is a common issue that isn't correctly connected to plumbing or drainage problems. You just installed a brand-new dishwasher, but you neglected to plug in a little component before you left.

For proper draining, your dishwasher must be connected to the waste disposal system in the sink. Connect the dishwasher's drain hose after removing the plug from the interior of the waste disposal.

A hammer with a screwdriver is required to remove the specific plug. Inserting your finger into the trash disposal's drainage hole can help you find the impediment. You can push into the waste disposal by stroking the flat side of the screwdriver down its edge.

To remove the plug, grab it with pliers or your hand and reach down inside the drain. Imagine that you successfully connected the drain line to the dishwasher and then removed the knockout plug. There will be an opportunity to fix any drainage problems that have been occurring at this time.

Is It Ok To Utilize The Garbage Disposal With A Dishwater Source?

Since a dishwasher is not the same as a sink, it probably doesn't have its drain in your home's plumbing. They dispose of waste and include any food bits left on dishes and glasses after washing them. Trash disposal problems, like slow drainage or a clogged drain, can cause problems with the dishwasher.


Since you know the process to stop water flow to the waste disposal, you need not worry about the condition of your dishes since you can easily switch off the water supply.

You should feel a certain amount of relaxation as a result of it. The abovementioned rubber stopper is the most practical way to keep water from entering the disposal while dishwashing.

A dishwasher connection kit and a half-inch cap made of copper can do it easily.

Share this post